ME-SENSE, 2026

A maritime IoT app, taken over and further developed.

We maintain the app for a maritime AIS and safety device brand: from App Store releases to the AWS backend to device, sensor and firmware logic. With a maintenance SLA.

Building a project like this View project

Detail view of the air pressure sensor with gauge instrument and trend chart.

Dashboard of the ME-SENSE app: onboard power, air pressure, temperature, humidity, hatch, bilge and shock as tiles for the boat Kondor.

Screens

This is how it looks.

A selection of screens from the product. Swipe through.

Dashboard with all of a boat's sensors as tiles, each showing a reading, battery status and radio status. — All of a boat's sensors at a glance

Detail view of the air pressure sensor with gauge instrument at 973 hPa and a trend chart of the last 24 hours. — Air pressure with a 24-hour history

Humidity sensor at 30.6 percent with a trend curve and a red, unacknowledged alarm message below it. — Alerts report every event

Temperature trend over 30 days with a highlighted data point at 27 degrees and the alert thresholds below. — History spanning 24 hours to 30 days

See for yourself

Problem

What we did.

Takeover of an existing React Native app from the previous developer, including repository migration and AWS onboarding, with ongoing maintenance and further development since then: regular store releases, operation of the AWS Amplify backend, firmware update logic for two hardware types, and sensor arming.

Effect in figures

Which was measurable in the end.

01 Live, SLA iOS + Android

02 AWS Amplify + IoT Backend & devices

03 Wartungsvertrag With SLA

Information

How it was built.

Platforms: iOS
Android
Tech Stack: React Native
Expo / EAS
AWS Amplify
AWS IoT
Sentry
Architecture: React Native app with AWS Amplify backend, AWS IoT for device and sensor data, firmware update logic.
Duration: Since late 2025, set up for the long term